Ophthalmology
Articulated arms
OptoSLT
Advantages
OptoSLT is a laser for Selective Laser Trabeculoplasty. This is a laser procedure used to treat open angle glaucoma by reducing the pressure within the eye. The laser system is a Q-switched frequency doubled Nd:YAG laser emitting short pulses at the wavelength of 532 nm. OptoSLT emits pulses at levels from 0.2 to 2.6 mJ. Red laser diode aiming beam with continuous power adjustment allows precise targeting of the SLT laser. OptoSLT can be integrated into the e-SlitLight or adapted to various slit lamps.
LED ILLUMINATION
Laser system is adapted onto the e-SlitLight. e-SlitLight is an ophthalmic slit illumination system with a white LED light source. The LED light source is a solid state light with a life expectancy in the range of thousands of hours. White LED illumination means constant light colour independent of light intensity and lower colour temperature at high contrast. Therefore more details can be seen and better images obtained.
MECHANICAL PRECISION AND OPTICAL QUALITY
OptoSLT is made with special care. High quality optical and mechanical components are made in-house or in close cooperation with suppliers within the EU.
EASE OF USE
High level solutions and sophisticated electronics provide owners with an excellent diagnostic tool and SLT laser. Located next to the joystick, the fine energy setting buttons, enable the physician to adapt the energy used to the clinical needs and keeping continously control throughout the treatment.
ERGONOMIC DESIGN
Alongside precise and smooth mechanisms the OptoSLT is ergonomically designed with special attention paid to ease of use. OptoSLT includes side-mounted table with a motorised lifting mechanism which means it can also be easily used by wheelchair patients.
- laser light stimulates the body’s own healing response to lower eye pressure
- effective as primary, adjunctive or repeat therapy
- safe, office-based procedure
- reimbursed by most insurance policies
OptoSLT is a laser for Selective Laser Trabeculoplasty. This is a laser procedure used to treat open angle glaucoma by reducing the pressure within the eye. The laser system is a Q-switched frequency doubled Nd:YAG laser emitting short pulses at the wavelength of 532 nm. OptoSLT emits pulses at levels from 0.2 to 2.6 mJ. Red laser diode aiming beam with continuous power adjustment allows precise targeting of the SLT laser. OptoSLT can be integrated into the e-SlitLight or adapted to various slit lamps.
LED ILLUMINATION
Laser system is adapted onto the e-SlitLight. e-SlitLight is an ophthalmic slit illumination system with a white LED light source. The LED light source is a solid state light with a life expectancy in the range of thousands of hours. White LED illumination means constant light colour independent of light intensity and lower colour temperature at high contrast. Therefore more details can be seen and better images obtained.
MECHANICAL PRECISION AND OPTICAL QUALITY
OptoSLT is made with special care. High quality optical and mechanical components are made in-house or in close cooperation with suppliers within the EU.
EASE OF USE
High level solutions and sophisticated electronics provide owners with an excellent diagnostic tool and SLT laser. Located next to the joystick, the fine energy setting buttons, enable the physician to adapt the energy used to the clinical needs and keeping continously control throughout the treatment.
ERGONOMIC DESIGN
Alongside precise and smooth mechanisms the OptoSLT is ergonomically designed with special attention paid to ease of use. OptoSLT includes side-mounted table with a motorised lifting mechanism which means it can also be easily used by wheelchair patients.
